Salon Comb Information

   How the LeNaté Salon Comb works:

Standard Instructions:

1. If needed,  pre-mix liquid products according to the manufacturer's directions. 
2. For proper flow and drip-control, select the foam insert for the thickness of solution to be dispensed. Use the THIN insert for watery, thin solutions. Use the THICK insert for gel-like, thicker solutions. The Salon Comb comes with the THICK insert pre-installed. To change the insert, open the comb by squeezing in the small tab on the rubber base locking ring. Pull the bulb off the nozzle and pull out the insert by its plastic tab.
3. Flip open the nozzle top plug and add up to 125 ml of solution. 
4. Press the top plug securely back into the nozzle hole.
5. Slowly squeeze the reservoir bulb to deliver solution to the comb teeth and then comb through the hair. Control the flow by applying pressure to the rubber base. To stop flow, release pressure.
6. More solution may be added by reopening the top plug.
7. After use, wash all the comb parts with warm water, dry, replace the nozzle foam insert and reassemble. 
8. The LeNaté Salon Comb is ready for your next application. 

Dimensions: 

• Standard Comb (nozzle + rubber bulb)

                   140x76x32mm (l-w-h)

• Mini Comb (nozzle + rubber bulb)

                   76x41x16mm (l-w-h)